Quantcast
Channel: ToManual.com » unit position
Viewing all articles
Browse latest Browse all 6

2001 PEUGEOT 206 CC SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS GUIDE

$
0
0

Download ALARM/SIREN POSITION Position the compact alarms and the sirens in the engine compartment on the support located on the left of the driver’s side shock absorber column. CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard, driver’s side. POWER SUPPLY + 30: connect to the 3 mm2 RED supply wire of the BSI operating central. – 31: connect directly with a cable terminal to the car body. As alternative, connect directly to the negative pole of the battery. IGNITION WIRE + 15/54: connect to the wire located at the position nr. 4 of the 26 way light blue connector coming out of the BSI operating central. DIRECTION INDICATORS Connect to the wires located at the positions nr. 10 and nr.11 in the 16 way black connector coming out of the BSI operating central. ELECTRIC WINDOWS Negative control signal Windows with automatism To make the windows locking it is necessary to transmit a negative control. For the autodriven Bridge serie antithefts it is sufficient to connect the BROWN/WHITE wire as per the A section of the diagram nr. 92. For the no autodriven Bridge serie antithefts and the 3100 serie central units it is necessary to utilize the temporized relay art. 1055 as per the B section of the diagram nr. 92. CENTRAL DOORS LOCKINGNegative control signal Refer to the diagram nr. 88 for the antithefts of the Bridge serie and to the diagram nr. 88A for the antithefts of the 3100 serie. IMMOBILISATION POINT Fuel pump Cut the wire marked nr. 121 located under the relay holder box in the engine compartment; as alternative, the same wire is located in the wiring harness behind the driver’s side sill cover. STARTER + 50: Cut the activation control wire of the relay of the starter located in the wiring harness coming out of the connector of the ignition key. BONNET SWITCH Install an additional switch on the front headlamp support plate, driver’s side. DOORS AND BOOT SWITCH Connect to the wire located at the position nr. 14 of the 26 way BSI operating central.

Originally posted 2012-02-28 12:34:15. Republished by Blog Post Promoter


Viewing all articles
Browse latest Browse all 6

Latest Images

Trending Articles





Latest Images